Por un escritor de hombre misterioso
The USB-485-1 is a port-powered, bi-directional, integrated USB to RS485 adapter / converter that can be used to convert any standard full-duplex USB port into a two-wire balanced half-duplex RS485 port and vice versa. The unit can be used to communicate with one loop of up to 256 units of RS485 devices and it comes with a built-in selectable 120-Ohm terminator for system reliability and easy installation (see Application Note). This USB to RS485 adapter / converter is powered from the USB port and it supports data auto-sensing & self-adjusting, therefore, no baud rate setting is required. And with the data direction auto-turnaround technology, no external power or flow control is required for RS485 communications. The USB to RS485 adapter / converter uses the latest FTDI chipset and is fully compatible with Windows 10 / 8 / 7 / Vista
The FBR-Serial-2 (SM / ST) is a single-mode (SM), rugged, industrial-grade, multi-function RS232 / RS422 / RS485 to fiber optic converter that
COMMFRONT Industrial RS232 / RS485 / RS422 to Fiber Optic Converter, Single-Mode, ST Connectors, 25 Miles / 40KM, DIN-Rail/Wall/Panel Mount
Rugged industrial-grade RS485 / RS422 to TTL converter / TTL repeater Converts 2-wire RS485 or 4-wire RS422 to 5V TTL and vice versa, or extends
Industrial RS422 / RS485 to TTL Converter/TTL Repeater, 600W Surge Protection and 15kV Static Protection
Serial adapter RS485 2 pin to USB - Cablematic
Rugged industrial-grade USB 2.0 isolator (backward compatible with USB 1.1) 5000Vrms isolation (per UL 1577) protects your computer from ground loops,
Industrial USB Isolator, USB 2.0 5000Vrms Isolation (per UL 1577), Low and Full Speed Data Rate: 1.5Mbps and 12Mbps, Plug-n-Play, No Drivers Required
SWD GmbH, Hard-+Software Distribution, CFR-USB-485-1
COMMFRONT USB to 4-Wire RS422 / RS485 Adapter, FTDI Chipset, Built-in 120-Ohm Terminator, Supports All Major Windows, Mac, and Linux : Electronics
The USB-485-1 is a port-powered, bi-directional, integrated USB to RS485 adapter / converter that can be used to convert any standard full-duplex USB
USB to 2-Wire RS485 Adapter / Converter
RS485 to TTL Converter / Adapter (Industrial) – CommFront
The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced
2-Wire RS485 Surge Protector (Industrial / Passive)
USB to Dual TTL Converter – CommFront
RS232 Opto-Isolator (3-Wire / Industrial / Port-Powered / Custom-made – CommFront
Opto-Isolated RS232/RS485/RS422(4-Wire) 4-Port Hub / Splitter (Industr – CommFront
SWD GmbH, Hard-+Software Distribution, CFR-USB-232A-1
The FBR(M)-Serial-2 (SM / SC) is an advanced, single-mode (SM), rugged, industrial-grade RS232 / RS422 / RS485 to fiber optic converter that supports
RS232 / RS485 / RS422 to Multi-Drop Fiber Optic Converter (Industrial / SingleMode / SC)