Por un escritor de hombre misterioso
Cargador de batería de litio 2S 7.4V 10A
HTRC LiPo Cargador de batería 2-3S Cargador de equilibrio 7.4-11.1V 15W RC B3AC PRO MAX Cargador de batería compacto (negro profundo) : Juguetes y Juegos
Maxima corriente de trabajo: 8A Corriente instantanea maxima: 16A
Modulo Cargador Baterias Lipo BMS 2 Celdas 2S 18650 7.4v 8A Con
Cargador rápido de litio de 8,4 V, 10A, 2S, 7,2 V, 7,4 V, almacenamiento de energía de iones de litio, batería Solar RV de 100AH, cargador inteligente - AliExpress
This is a 2S 8A 7.4v balanced 18650 lithium ion lithium battery BMS charger protection board, current limiting protection about 10A. Short Circuit Protection: Protection, disconnect load delay self-recovery. Note: All the protection boards are connected to the battery in an unstable state. Some of them are always in a protected state. Most of them need to be charged and activated before output! The battery is disconnected and reassembled and activated again (Otherwise, the circuit is locked).
Comimark 2pcs 2S 8A 7.4V Balance 18650 Li-ion Lithium Battery BMS Charger Protection Board
Comprar 2S 10A 7.4V 18650 Placa de protección de batería de litio protección equilibrada 8.4V
Cargador de batería de litio 2S 7.4V 20A
Placa de protección de cargador de batería de litio 2S 3S 4S, Li-ion 18650, PCB, BMS, 3A, 4A, 5A, 6A, 8A, 10A, 16A, módulo de celda Lipo para Motor de taladro
cargar 2 o mas BATERIAS DE LITIO con un modulo BMS
KBT - Batería de litio para automóvil a control remoto: batería recargable de iones de litio de 7.4 V 1200 mAh, corriente de descarga de 10 A, con enchufe SM -2P
This is a 2S 8A 7.4v balanced 18650 lithium ion lithium battery BMS charger protection board, current limiting protection about 10A. Short Circuit Protection: Protection, disconnect load delay self-recovery. MOS transistor can control the battery charge and discharge. Note: All the protection boards are connected to the battery in an unstable state. Some of them are always in a protected state.
ACEIRMC 5pcs 2S 8A Li-ion 7.4V 8.4V Li-ion Lithium Battery 18650 Charger PCB Protection Board for Li-ion Lipo Battery Cell Pack
Este cargador se conecta directamente a la red electrica de 110-240 AC. Puede cargar baterías LiPo de 7.4V o 11.1V y de 2 o 3 celdas. La tasa de carga
Cargador de Baterías LiPo B3AC 7.4V/11.1V 2S/3S
JZK 5 unids 2S 7.4V batería de litio protección módulo de la placa, 7.4v 8.4V 2S BMS placa de protección de descarga de carga PCM para Li-Ion Lipo Battery 18650
2S/10AMP. PCB BMS CARGADOR BATERIA LITIO 18650 CON BALANCE 8.4V
Módulos de Carga y BMS - Electronica Guatemala SMD