With this case you can mount a Samsung Smarttag wonderfully protected under the saddle on the bike. The housing consists of 2 parts and is mounted with a M4x17 mm countersunk screw and an embedded nut. Thus, the theft protection of the smart tag is guaranteed. The screw goes through the eye in the smart tag. Now fasten the housing with 2 cable ties under the saddle or in another suitable place. The cover (Smarttag_Top) must be changed in its orientation on the plate, then you can print without support. I have changed and adjusted the holder a little more.
smarttag bike 3D Models to Print - yeggi
samsung smarttag 3D Models to Print - yeggi - page 34
phone bicycle holder 3D Models to Print - yeggi - page 13
Slim design case for Samsung Galaxy Smart Tag Plus / Standard Smart Tag., Case designed to be fitted with two M6 bolts. Clearance Hole 5.7 mm - 5.9
Samsung Galaxy Smart Tag Case fits standard Smart Tag and Smart Tag Plus
smarttag bike 3D Models to Print - yeggi
smarttag 3D Models to Print - yeggi
Smarttag best STL files for 3D printingă»12 models to downloadă»Cults
samsung smarttag 3D Models to Print - yeggi - page 3
Samsung SmartTag2 mount for the bike fork., Please measure., 1. variant small from 30mm to 33mm fork opening., 2nd variant from 32mm to 38mm fork
Samsung SmartTag2 holder Bike Ebike GPS holder MTB fork
smarttag bike 3D Models to Print - yeggi
motorola dp4400 3D Models to Print - yeggi - page 7