Features Large torque: 20kg.cm 7.4V large torque Full metal gear: improve servo’s accuracy and extend its service time Aluminum case: it enhances heat dissipation and ensures servo motor work properly High-precision potentiometer: accuracy and linearity have been greatly improved 270°Rotation: Controllable angle range from 0 to 270°, excellent linearity, precise control.
Specification
Specification
Product weight
0.15Ib / 66g
Product size
1.57*0.8*1.59inch / 40*20*40.5mm
Rotation speed
0.20sec/60°(7.4V)
Stall torque
20 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~270°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~270°
Servo accuracy
0.3°
20kg Large Torque
This servo boasts an impressive maximum torque of 20KG.CM 7.4V, enhanced by its
accompanying metal servo arm. Delivering robust power, it is housed within an aluminum alloy casing
that facilitates excellent heat dissipation, thereby effectively reducing power consumption.
All Metal Gear
This product showcases exceptional performance, minimal noise output, and the
inclusion of metal gear and dual-ball bearings. By integrating a high-precision potentiometer, its
accuracy and linearity are greatly enhanced leading to an extended service life.
Waterproof Protection
The controllable angle range of the steering gear is 270 degrees, with good
linearity and accurate control. It can be rotated 360 degrees when the power is off.
270°Rotation
The controllable angle range of the steering gear is 270 degrees, with good
linearity and accurate control.
It can be rotated 360 degrees when the power is off.
270°Rotation
The controllable angle range of the steering gear is 270 degrees, with good linearity and accurate control.It can be rotated 360 degrees when the power is off.
Specifications
Item
Specification
Product weight
0.15Ib/ 66g
Product size
1.57*0.8*1.59inch/ 40*20*40.5mm
Rotation speed
0.20sec/ 60°(7.4V)
Stall torque
20 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~270°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~270°
Servo accuracy
0.3°
Hiwonder HPS-2027MG 20KG High Torque Digital Servo Motor Full Metal Ge
Hiwonder LD-27MG Full Metal Gear Digital Servo with 270 Control Angle
Hiwonder 20KG High Torque Digital Servo Motor Full Metal Gear, Waterproof Servp for RC Mode DIY,Control Angle 270° : Toys & Games
Hiwonder HX-20L 20kg High Torque Serial Bus Servo with Real-time Feedb
Hiwonder HPS-2027MG 20KG High Torque Digital Servo Motor Full Metal Ge
Hiwonder HPS 2518MG 25KG High Torque Digital Servo w/ Full Metal Gear for Robotic Arm, RC Car & Single Shaft - RobotShop
Analog Servos for Robotics, Servo
Hiwonder LD-27MG Full Metal Gear Digital Servo with 270 Control Angle
PWM Servo – Hiwonder
Readytosky 20KG Digital Servo High Torque Full Metal Gear Waterproof Servo 180 Degree with 25T Servo Horn for RC Toys Model : Toys & Games
Hiwonder Robotic Servo & Controller
Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270° : Toys & Games
Hiwonder HPS-2027MG 20KG High Torque Digital Servo Motor Full Metal Ge
Hiwonder High Torque Digital Servo Motor Full Metal Gear Supports Robotic Arm and RC Car – Oz Robotics