The Lian Li 011D EVO is launched and with it our Distroplate "C1 EVO". The case amazes with its versatility. In addition to the option of installing the graphics card vertically or upright, the entire housing can be turned upside down, and with it our distroplate! A reverse setup is possible in no time. Features in detail The water channels are arranged in such a way that there is always a clean build. There are three independent channels with a total of 18x G1/4" ports to connect the CPU, GPU and up to 3x 360mm radiators with each other. Our "C1 EVO" is mounted behind the tempered glass pane. There are standard holes in the frame of the housing, which means that our Distroplate can be easily fixed with only 4 screws. The Distroplate comes with a pre-installed RGB Stripe.
The Lian Li 011D EVO is launched and with it our Distroplate C1 EVO.
The case amazes with its versatility. In addition to the option of installing the graphics card vertically or upright,
the entire housing can be turned upside down, and with it our distroplate! A reverse setup is possible in no time.
Features in detail
The water channels are arranged in such a way that there is always a clean build. There are three independent channels with a total of 18x G1/4 ports to connect the CPU,
GPU and up to 3x 360mm radiators with each other. Our C1 EVO is mounted behind the tempered glass pane. There are standard holes in the frame of the housing,
which means that our Distroplate can be easily fixed with only 4 screws. The Distroplate comes with a pre-installed RGB Stripe. This ensures a nice ambience in the gaming room and gives our C1 EVO
that certain something. A new universal pump adapter now allows the installation of a D5 or DDC pump. Free choice, no additional costs! The filling of the Distroplate is very easy to do when installed.
All you have to do is remove the tempered glass pane. The filling hole is in the upper area. As usual, we rely on the most transparent look possible. Only the chambers and reservoirs are first roughed
with our CNC machines and then finished in the second pass, giving them a slightly milled finish.
Mit der installierten Distroplate beträgt die maximale Radiatordicke wie folgt:
Top: 48 mm + max. 25 mm fan thickness
Bottom: 48 mm + max. 25 mm fan thickness
Side: 50 mm + max. 25 mm fan thickness
Features at a glance
• can be used inverted
• addressable RGB stripe incl.
• 18x G1/4” ports distributed over 3 channels & 1 reservoir
• four screws for quick assembly
• universal adapter for D5 & DDC
Technical details
• Product dimensions: Dimensions with adapter (B x H x T): 402 x 207 x 36 mm
• Color: Clear
• Material: Acrylic Glass, Plastic
• Connections: 18x G1/4 Ports
Delivery scope
• 1x Lian Li Evo C1 EVO
• 4x mounting screws
• 1x universeller Adapter for D5 & DDC
Assembly Instructions
Installation manual EN
Important note
Compatible only with Lian Li PC-O11D Evo case.
The DDC pump or D5 pump is water lubricated and must not run dry; otherwise permanent bearing damage may occur.
The PC case is for display purposes only and does not come with the product.
Fittings Please only screw hand-tight into the distroplate, do not use a wrench. Danger: If the fittings are too tight, the acrylic may crack and leak!
Explore the Lian Li C1 EVO Distroplate, designed for the Lian Li 011D EVO case. With 18x G1/4 ports, it connects CPU, GPU, and up to 3x 360mm
Lian Li 011D Evo C1 EVO Distroplate
Build 011D Mini - Full ATX with 3 radiators and STEALKEY V2 Distro
Bykski Distro Plate For Lian Li O11 Dynamic EVO - PMMA w/ 5v
Lian Li 011D Evo D3 Distroplate - Acrylic
O11D EVO Gets An EK-Quantum Reflection² Distribution Plate
PC Water Cooling Distributions Plates
Bykski - Lian Li O11 Dynamic EVO Distro Plate RBW
O11D EVO Distro Plate G2 – LIAN LI is a Leading Provider of PC
Lian Li 011D EVO SET S1 Reservoir + Distroplate D3
Lian Li O11D Evo Mid Tower Case - Black
Lian Li O11D XL EVO Rear Distribution Plate - Singularity Computers
Lian Li O11D EVO Mid-Tower Case - Black