Quick Cure Wood Putty - System Three Resins

Reduce downtime and increase productivity in manufacturing and production environments.  Quick Cure Wood Putty fills knots and voids in a single fill without shrinking.  It sets in 10 minutes and sands in 1 hour.  This unique wood filler machines easily without clogging up abrasives.  Quick Cure Wood Putty is stainable

Expoxy putty. SculWood Series. Moldable waterproof putty that kneads like clay and cures to a permanent wood-like state. For interior and exterior use. Use to replace rotted or chipped away wood cracks and other cosmetic defects in window and door sills frames railings and furniture. Will not shrink or become brittle after curing. 1 to 1 mixing ratio. Resin and hardener easily mixed by hand. Once cured it can be sanded carved or machined and will hold fasteners nails and screws.

SculpWood 1600K16 Moldable Epoxy Putty1 Quart

Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. RotFix is a component of The EndRot System. It creates a sound, waterproof base for repair and restoration filler putty. A unique measuring/application bottle is available, with this bottle you can accurately measure, mix and apply RotFix in batches from two ounces to 7 ounces. 100% solids formulation is low odor and solvent free.

System Three Rotfix Penetrating Wood Sealer (3 Ounce) 1500K06

System Three Quick Cure 15 Epoxy sets in 15 minutes. This makes it perfect for those wanting a faster set time for larger projects or just needing extra time for multiple glue-ups, fitting and clamping. Two-bottle kit (hardener and resin) with an easy 1-to-1 mixing ratio makes it hard to mess up. Be advised heat or lack of can affect cure time, but quality ingredients enable it to come pretty close to 15 minutes, so there arent any surprises when using it.

System Three 1010K10 Quick Cure 15, Kit, 1/2 Pint, Amber

For the repair and restoration of damaged wood. Features a preservative treatment to eliminate fungus and wood-eating insects; a penetrating epoxy to restore structure damage to wood; and a moldable, sandable epoxy putty to replace missing wood. Components are available separately and in larger size for large projects.

System Three 4005k99 EndRot Kit

System Three SculpWood Putty Epoxy Filler, 1 Quart Kit: Painting Supplies: : Industrial & Scientific

Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. Rot Fix is a component of The End Rot System. It creates a sound, waterproof base for repair and restoration filler putty. A unique measuring/application bottle is included with each 24 ounce Rot Fix kit. With this bottle you can accurately measure, mix and apply Rot Fix in batches from two ounces to 7 ounces.

System Three 1500K42 Rotfix Kit 1.5 Quarts Brown

Similar to the Quick Cure-5 Epoxy (5-minute cure), Quick Cure-15 Epoxy sets in 15 minutes. This makes it perfect for those wanting a faster set time for larger projects or just needing extra time for multiple glue-ups, fitting and clamping. Two-bottle kit (hardener and resin) with an easy 1-to-1 mixing ratio makes it hard to mess up. Be advised heat or lack of can affect cure time, but quality ingredients enable it to come pretty close to 15 minutes, so there aren't any surprises when using it.

System Three Quick Cure 15-Minute Epoxy Adhesive Kit, 1 Pint.

SculpWood Paste Spreadable Epoxy Wood Filler Paste - System Three Resins

SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has 4X the compressive strength of standard SculpWood Putty. SculpWood Max is non-shrinking and forms a permanent bond to properly prepared wood substrates. SculpWood Max is machinable when fully cured and is compatible with most water/oil-based primers and paints. Note: SculpWood Max should be used in conjunction with RotFix Penetrating Epoxy Sealer.

System Three SculpWood Max Putty Epoxy Wood Filler, 1/2 Gallon Kit

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 77F (25C) QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift, or six coats on a round-the-clock basis.

System Three 1400K42 Silvertip QuikFair Kit, 1.5 Quarts, Tan

System Three QuikFair Epoxy Fairing Putty, 1.5 Quart Kit: Cell Phone Protective Skins: : Industrial & Scientific

Epoxy - System Three Epoxies - System Three GP Epoxies - System Three Specialty Resins - System Three SculpWood - Fiberglass Supply

Reduce downtime and increase productivity in manufacturing and production environments. Quick Cure Wood Putty fills knots and voids in a single fill without shrinking. It sets in 10 minutes and sands in 1 hour. This unique wood filler machines easily without clogging up abrasives. Quick Cure Wood Putty is stainable and is compatible with most finishes.

System Three Quick Cure Putty, Black Walnut, 8-oz Kit