Por un escritor de hombre misterioso
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. The UNO can be programmed over a USB B cable using the Arduino IDE.
Generic ATmega328P CH340 Compatible with Arduino UNO R3 w/ USB Cable - ZYLtech Engineering, LLC
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you are ready to upload sketches. You can power the ATmega328P Board over USB or through the barrel jack.
Envistia Arduino Uno R3 Compatible with USB Cable ATmega328P CH340 USB
Only 9.56 usd for ATmega328P Microcontroller Starter Kit 400 Point Breadboard, 65 Jumpers, USB & Battery Cables Online at the Shop
This Arduino-Compatible ATmega328P USB-C microcontroller development board has all of the features of the original Arduino Uno with the added benefit
ATmega328P USB-C CH340 Microcontroller Development Board Arduino Compatible
AITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 With1 Cable) : Electronics
HiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to
Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340
Mini Nano V3.0 ATmega328P Module Micro Controller Board with USB Cable for Arduino
This is a modification to the standard Digispark board using a Micro USB port rather than USB pins as part of the PCB. This makes it easier and more cost-effective, as it can be connected to the PC using a standard MicroUSB cable. Digispark is a tiny, Arduino compatible development board using the ATMEL ATtiny85 microcontroller. It has its own USB bootloader and built in USB capability, allowing you to program it with the Arduino SDK and also use it as native USB device.
Digispark Kickstarter Attiny85 Micro USB Development Board for Arduino
ATmega328P Board 16MHz CH340G Cable (Arduino-Compatible) – Flux Workshop
Development Board ATmega 328P CH340 compatible with Arduino UNO IDE – BoardsAndSensors
The ATTiny88 (16.0Mhz) based microcontroller development board is similar to the Arduino microcontroller line, only smaller and a bit less powerful. With the ability to use the familiar Aduino IDE, the ATTiny88 is a great microcontroller board to jump into electronics, or perfect for when other boards are too big or too much. The ATTiny88 (16.0Mhz) is fully assembled except for the headers, which are included and are easy to solder yourself.
Envistia Attiny88 Micro Development Board ATmega328 16MHz / Digispark Attiny85 Upgrade for Arduino